How to Safely Disassemble Tires? Some Practical Suggestions are Here!

Whether you're replacing an old 
        
        tire, fixing a leak, or upgrading your 
        
        wheels, properly removing a tire is a critical step in ensuring safety and efficiency. As a professional automotive tire and wheel supplier, we understand the importance of tools and techniques. In this article, we will provide you with concise steps to help you complete tire removal with ease!

Step-by-Step Tire Removal Process

Step 1: Secure vehicle and loosen screws

. Park the car on a flat surface, pull the handbrake and secure the diagonal tires with wheel stops.

. Loosen (do not remove completely) all screws on the wheel hub counterclockwise with a Phillips wrench.

Step 2: Lift the vehicle

. Align the hydraulic jack with the designated support point on the vehicle chassis (refer to the instruction manual) and slowly lift until the tire is about 5 cm off the ground.

Step 3: Completely remove the tire

. Remove all screws, hold both sides of the tire with both hands and pull it outward vertically.

. If the tire is stuck: spray tire lubricant on the edge of the wheel and tap the sidewall or use a rubber mallet to assist in loosening.

Step 4: Inspection and Storage

. Check the wheel and screws for damage, clean and store the tire.

Professional Advice

· Avoid violent disassembly: damage to the wheel may increase repair costs.

· Maintain the screws regularly: rusty screws can be coated with rust inhibitor for easy removal next time.

· Safety first: never operate on slopes or unstable ground!

Need tires or wheels? 
        
        Contact us! 

As a one stop supplier of car tires and wheels, we offer cost effective tires, alloy wheels and full range of auto accessories, support wholesale and customized service.

Request a quote now to get your professional solution!